Prothane Poly Bushing part numbers

alright i forgot about this but if anyone wants to know, the prothane part numbers for swaybar bushings and endlinks that fit our cars are

24mm swaybar bushing - 19-1123
25mm swaybar bushing - 19-1124
rear endlinks - 19-408
front endlinks - 19-401

this all came to about 55$ and was WELL worth it, keep in mind this will only work for XE's and SE's, turbos have a diff size rear sway bar ive been told, so the rear swaybar bushing wont work

*UPDATE*

84-89 300zx rear subframe bushings - 14-101
84-89 300zx rear control arm bushings - 14-303

note - prothane just started making these 300zx subframe bushings as of 7/15/04 so it may take a little time before we can get them.

to get this stuff check out

www.suspension.com (http://www.suspension.com/)
www.prothanesuspension.com (http://www.prothanesuspension.com/)

Sweet ...

and yeah, the ca20e and VG30E cars came with fatter rear sway bars ... never found out why.

Hmm ... I should get my hands on one, and see if they'll bolt in, then all these parts will work.

Wasn't it mentioned once that Prothane makes Z31 subframe bushings? I'd like to know that part number, if I were to swap springs on my 200 the subframe bushes would be a definite weak link.

ahh so where do we use these part #'s to get these puppies...

i updated my first post, has links and more part numbers :D

*UPDATE*

84-89 300zx rear subframe bushings - 14-101
84-89 300zx rear control arm bushings - 14-303

note - prothane just started making these 300zx subframe bushings as of 7/15/04 so it may take a little time before we can get them.

^^The turbo models can use these though, correct?

the turbo model can use all the same bushings minus the 24mm rear swaybar bushings, all the rest are the same, all you need to do is figure out what size swaybar the turbo used in the rear, if someone posts it ill look up the part number......

Not sure why everyone says the turbo models had a smaller rear sway bar. My 1985 FSM lists it as having a 24mm rear bar. I went out and measured it on mine and it is indeed 24mm and it lists them being the same between the turbo and and non. Not sure if this is an 85 year only thing or not but that is what mine has.