Club-S12 ET List

1.) Ben D : 9.63 @ 147.0 mph FJ20ET
2.) Mechperformance : 12.4 @ 119 mph VG30ET
3.) Bart : 14.085 @ 98.80 mph CA18ET
4.) Neb : 14.2 @ 104mph SR20DET (gt)
5.) Scooter : 14.201 @ 104.77 mph CA18DET
6.) Joakim : 14.897 @ ?? mph CA18ET (from 1/8 mi)
7.) one_equals_two : 15.13 @ 98.7mph CA18ET (gt)
8.) Johnnyfive : 15.61 @ 91.6 MPH (gt)
9.) Karlowicz Maciej : 15.833 @ ~93 mph CA18ET
10.) kyle : 16.419 @ 84.16 mph VG30E
11.) gazelle_Power84 : 16.43 @ 79.54 mph CA20E
12.) Travis Hatt : 16.574 @ 82.21 mph CA18ET
13.) Dan Aho: 16.61 @ 83.28 mph VG30E
14.) Patrick Doody : 16.784 @ 81.47mph VG30E
15.) Pavement : 16.793 @ 83.62mph VG30E
16.) Texan : 17.25 @ 83 mph VG30E (gt)
17.) DJ_200sx : 17.723 @ 71.51 mph CA20E (gt)

_____________________________________________
Alright guys, this is how it works. I will edit this post whenever someone responds to this thread with a time from a 1/4 mile drag race. Until the slip is scanned in you will see a "ns" for "no slip" next to your name. Also, you may submit G-tech times but there will be a "gt" next to your time to show that it was not against an actual clock.

So if you have a time, respond to this post with car / engine information, ET, trap mph

No comments in this thread please. ONLY TIMES

Hi guys,

My car is a whits S12RSX. FJ20ET engine. 2.5in cat back crappy exhaust. Small front mount cooler. 13psi. That is all. At 2004 Jamboree in QLD, i ran a 13.9 @ 101mph. I was on 185 street tyres, with my esky and heaps of gear in the boot, just how I drov it to/from my house. I dont have my time slip on file, but my results were wittnessed by 30,000 people watching the finals of my time bracket. Some of you aussies out there might have seen me race.
Thanks.

Hi guys,

My car is a whits S12RSX. FJ20ET engine. 2.5in cat back crappy exhaust. Small front mount cooler. 13psi. That is all. At 2004 Jamboree in QLD, i ran a 13.9 @ 101mph. I was on 185 street tyres, with my esky and heaps of gear in the boot, just how I drov it to/from my house. I dont have my time slip on file, but my results were wittnessed by 30,000 people watching the finals of my time bracket. Some of you aussies out there might have seen me race.
Thanks.

imo no slip no "official" time.

You can sent a copy to me tho and i will scan it for ya for free!

Just an idea :)

Hello,

Just letting you know I finally got my S12 RS-X onto a decent drag strip in Australia and it ran as fast as 9.63 @ 147 mph. I've tried to contact this sites admin to let them know where they can pick up a video of a 9.63 @ 145.87 mph pass and the preceding burnout in the hope they will post it on this site somewhere so you can all hear the worlds fastest S12 and its FJ20 ET in action. I haven't got a scan of the timeslip, but I think the video will suffice for most unless they want the following incrementals:

rt .098
60 ft 1.42
330 ft 4.093
660 ft 6.244
660 ft mph 115.8
1320 ft 9.633
1320 ft mph 145.87

The tracks are so good here, I've left the car in Australia and may even try to go faster at some stage, but the stub axles begin to break at this state of tune, even if they are made out of billet tool steel, so I have to figure out how to get around that first.

cheers

Ben D

Hello,

Just letting you know I finally got my S12 RS-X onto a decent drag strip in Australia and it ran as fast as 9.63 @ 147 mph. I've tried to contact this sites admin to let them know where they can pick up a video of a 9.63 @ 145.87 mph pass and the preceding burnout in the hope they will post it on this site somewhere so you can all hear the worlds fastest S12 and its FJ20 ET in action. I haven't got a scan of the timeslip, but I think the video will suffice for most unless they want the following incrementals:

rt .098
60 ft 1.42
330 ft 4.093
660 ft 6.244
660 ft mph 115.8
1320 ft 9.633
1320 ft mph 145.87

The tracks are so good here, I've left the car in Australia and may even try to go faster at some stage, but the stub axles begin to break at this state of tune, even if they are made out of billet tool steel, so I have to figure out how to get around that first.

cheers

Ben D
awesome, that is great news!! please post some pics of the cdar too...8)

Hey Ben D are you the guy from fj20.com there is a video of an s12 that ran a 9 :yikes:. Just wondering if that is you. If that is you, you have an awesome s12.......

yep thats him sweet car

check out the club S12 multimedia section for a high quality video of one of the 9's - at least for this one you can hear the car.

dammn man wish i could get a fj here in the states easily and do a nice build up...

I'm off to the drags tonite in Adeliade, South Australia. in my s12 RSX, fj20et, hoping to crack into a 13 see how we go. i'll keep ya posted.
Trav

Heh he makes it sound so easy. Then again he does have an FJ.

things went horribly wrong, fuel pump woulnd't permit, i got a timeslip here for 15.8 but i'll hang onto it until next time i go out.

imo no slip no "official" time.

You can sent a copy to me tho and i will scan it for ya for free!

Just an idea :)

Why don't you buy the Fast Fours Issue of the 2005 jamboree? His Time is in there because he came second in his bracket. In front of all them people like he said. I was there in the crowd. It doesn't get more official than getting presented with a trophy at the race presentations at the end of the two days.

Why don't you buy the Fast Fours Issue of the 2005 jamboree? His Time is in there because he came second in his bracket. In front of all them people like he said. I was there in the crowd. It doesn't get more official than getting presented with a trophy at the race presentations at the end of the two days.

I just dont like ppl taking advantage of other ppls work. No harm intended. :???:

1.) Ben D : 9.12@ 153.4 Mph (was 9.63 @ 147.24 mph) FJ20ET
2.) S12_2_NV : 12.006 @ 113mph SR20DET
3.) Mechperformance : 12.4 @ 119 mph VG30ET
4.) Bart : 13.383 @ 101.93 mph CA18ET
5.) Fantasy : 13.614 @ 101.86mph FJ20ET
6.) Neb : 14.2 @ 104mph SR20DET (gt)
7.) Scooter : 14.201 @ 104.77 mph CA18DET
8.) Joakim : 14.897 @ ?? mph CA18ET (from 1/8 mi)
9.) one_equals_two : 15.13 @ 98.7mph CA18ET (gt)
10.) Johnnyfive : 15.61 @ 91.6 MPH (gt)
11.) Karlowicz Maciej : 15.833 @ ~93 mph CA18ET
12.) kyle : 16.419 @ 84.16 mph VG30E
13.) gazelle_Power84 : 16.43 @ 79.54 mph CA20E
14.) Travis Hatt : 16.574 @ 82.21 mph CA18ET
15.) Dan Aho: 16.61 @ 83.28 mph VG30E
16.) Patrick Doody : 16.784 @ 81.47mph VG30E
17.) Pavement : 16.793 @ 83.62mph VG30E
18.) Texan : 17.25 @ 83 mph VG30E (gt)
19.) DJ_200sx : 17.723 @ 71.51 mph CA20E (gt)
 
____________________________________________ _
Alright guys, this is how it works. I will edit this post whenever someone responds to this thread with a time from a 1/4 mile drag race. Until the slip is scanned in you will see a "ns" for "no slip" next to your name. Also, you may submit G-tech times but there will be a "gt" next to your time to show that it was not against an actual clock.
 
So if you have a time, respond to this post with car / engine information, ET, trap mph
 
No comments in this thread please. ONLY TIMES

G-Tech time
14.2@104mph
Stock SR20DET 3\" turbo back front mount 15psi

Oh yeah the car is a 1984 Nissan Gazelle SGL, full power options, sunroof etc (ie heavy bastard, it\'s around 1400kg with me in it and full fuel )

can i get mine up there..

RT .637
60ft 2.451
330 6.504
660 9.539 mph 82.71
1000 12.065
ET 14.201 mph 104.77

[url]http://users.tpg.com.au/adsl0wvf/drag1.wmv[/a]

CA18DET forged Arias 84mm pistons,
ACL bearings, fully balenced, decked o\'ring\'d
1.5mm copper head - Hi Flow\'d GT28
Head rebuilt ported, microtech LTX-8..

14psi 215 whp... 350nm tq

ah ill upload that VID again

Not an S12 (won\'t feel bad if you don\'t want it in the list :-) but...
14.51 @ 95.21
1978 Datsun S30 280Z
basically stock L28ET from 1983 280ZXT, 8psi
stock downpipe followed by 2.5\" pipe and glasspack
280Z 4spd
open 3.54 R200 at the time
195/65/14 balloons from my parts car

Maybe soon I\'ll be able to post about my 17 or 18sec pass the CA20 car should make :-P

1987 S12 SE-V6T
(VG30ET from a Z31)
12.4 at 119 MPH.....

Pictures! Pictures!  Post up in the VG30 forums.
 
 Congrats on the time.

--------------------------------------------------------------------------------

well had four runs and heres what i got

1. 14.745 @95.96
2. 14.485 @97.45
3. 14.240 @98.55(vs a 350z he won overall by .0696 but et he ran 14.305)
4. best one
r/t .409
60 2.054
330 5.906
1/8 9.076
mph 77.24
1000 11.800
1/4 14.085
mph 98.80

these wher all run on bf goodrich drag radials size 205/50r15
i will have a scan of the last slip when kextyn gets me the pic he took of it

heres my slip (IM # 178)

yay finally I can get on the list

15.61 @ 91.6 MPH G-tech

Hey guys, I have G-Tech cars on the track and it was out buy over a second every time. It saying the cars were a full second faster than what they actually were. Example: G-tech time 13.4 @ 104mph. actual time 14.4 @ 98mph. This was done at Willowbank Race Way in a GT Starlet. We tested it 4 times and it was all over the place. :dontknow:

well hit the track today and heres the best result

Well I finally went to Iwandales 1/8th Mi strip and had some fun first off I have the flu right now so my reaction time is a little off.(Even told work I had the flu  :razz: )But here is waht I got with 14 psi. 9.757, 9.813, 9.094
Looked like
R/T 1.088
60\'  1.943
330 5.903
1/8 9.094
MPH 78.33

Not a bad job for my first time.

Bart, what were you against that ran a 12.XXX? Nice run!

so i can say im sitting in the mid 13\'s with a mph of about 103-104mph the track open this sunday so we will see

fark nice run man... that makes me want to weld my diff and get a new clutch.... rego hahah... and take it to the track again....

maybe 12s wont be so hard after all

fark nice run man... that makes me want to weld my diff and get a new clutch.... rego hahah... and take it to the track again....

maybe 12s wont be so hard after all

I know I posted my time but it's gone. So here it is again.
13.614 @ 101.86mph on 13psi of boost. I got a 1.985 60 foot with 215/70/15's tiers.

Hit the track  with my S12 -88 ca18et, heres the best time, 14,138 sek 160,9 kp/h

well its time for me to get up on the list...at 13.8 @ 106.19 red top sr20det
will upload pix laters..

R/T......320
60\'.......2.307
330.......000
1/8......9.153
MPH.....79.70
1000....11.731
1/4......13.875
MPH.....106.19

this is with all season tires...195/70r14

i did run faster MPH at 108.21 @ 14.065

I just found my slip again yesterday
R/T  1.088
60\'   1.943
330\' 5.903
1/8  9.094
MPH 78.33

That was @14psi on a stock ca18det

only got 2 runs :/ . prettty much stock. just exhaust/ no air boxs and broke wastegate

r/t- .320
60- 2.164
330- 6.779
1/8- 10.553
mph- 66.06
1000- 13.763
1/4- 16.484
mph- 82.76

Here\'s is a slip my wife Cassie did in my gazelle. she was only running 10psi and reving to 6000rpm 14.210. Which is good for her 4th ever run drag racing.The car performs alot harder with 17psi and 9000rpm like when i drift race. I\'ve done 12\'s with a gtech but they DON\'T count.
So this one is for all the girls.
The engine is having it\'s 3rd build ATM should be finnished by the 10/2/06.
Lets see if she can handle some more boost and rpm.

Did this yesterday.  

9.38@ 149.21 mph.  60 ft 1.338.  Stock R200 LSD and half shafts in an S12 RSX with 5 speed manual, factory fitted FJ20ET and a set of modern motorsports stub axles ([url]http://www.modern-motorsports.com/catalog/default.php[/a])

Best MPH on the day was a 153.95 mph on a 9.47 pass.  0- 248 km/h in 9.5 sec.

you the shit!!  do you still have that video?  i think i remember seeing one of you a few yrs back running the quarter in 9 something seconds.  not sure what happened to it though.

I think I saved it to my hard drive somewhere. If you want it Premo I\'ll do some hunting and send it to ya.

please, that\'d be awesome.  we used to have it on the board till the server crash way long ago.  just email it to me if you find it :)  thanks

Video sent to your hotmail.

got it..thanks!

It was a single pass and we have video - into the sunset at dusk on a single pass, so should have the sights and sounds up on a site soon

I have put an AVI video of the 9.38 up at the following site

[url]http://www.digsfish.com/drags/938,149.avi[/a]

the file is a big one , around 18 meg, sorry if its too big

the previous file of the 9.63 is still there too

[url]http://www.digsfish.com/drags/bend_9_63.wmv[/a]

good luck with downloading them.

sweet, thanks!

13.1 quarter mile
60ft 2.028
108 Mph over line

14psi  t28 bb
Slipping clutch to the max (car still smells today LOL)
With bag of clothes, half a tank of fuel, extra oil water tools full stereo + subs and cheapest tyres I could buy at 32 psi pressure.

r/t .49xx
60' .240x
1/4 16.54 @ 83.84 mph.

Vg30E w/ MSD coil, NGK plugs/wires. HKS style air filter. Ka24 TB.

ill scan in the slips in a few days

EDIT: (as of 7/7/06)

r/t .3829
60' 2.3850
330' 6.8109
1/8 ET 10.5013
1/8 MPH 65.18
1000' ET 13.5990
1/4 ET 16.2901
1/4 MPH 85.21

so how up to date is this list anyways?? i know its been ages since i've been on here.. and i thought i posted this up before but here is my timeslip from when i ran my '88 SE at the strip:

looks like i have some competions lol

Especially Ben's 9 second FJ20 beasties here in Australia, see if your rebuilt version can crack that. I reckon it won't be long before he cracks 8's the way his times keep dropping!!