[AB-CAN] Erebuni SR20 S12 for sale!

Hello all,

I have decided that I am going to sell my super sweet Nissan 200sx. I do not want to sell it. I am not happy about selling it. But I'm at a point in my life where it is the best decision for me.

I have some outstanding debt. I got married in June. I moved to a place with troublesome parking. All these things add up and mean that if I want to get my life back on track - I need to get out of the car schnanigans for a while.

I have one of the only 200sx's in North America with a full Erebuni body kit installed on it. It also has a running swapped sr20det redtop swap in it. It's a very fast and very fun car to drive. I used it last year in my local auto-x and it was awesome fun. It is a great fun car and project car. The car is not perfect by any means. There are lots of things that still need to be done - and lots that I was working on and didn't get finished.

When the car was sold to me it was on the premise that I continue the project and don't part it out. I want to continue this tradition and ask the same of the person that buys it from me.

The price is $5000.00 CAD. No low-ball offers please! I am not parting so don't ask! Serious buyers please PM me and I will give out my phone number for chatting.

Price edit: $3300.00 CAD.

Bonus: I will also throw in my never been used Ractive reclinable bucket seats. They have slider rails that come with. It should be noted that they will need modifying to fit the car. I was planing on making brackets to adjust to the floor hump in the car.

Below is a more comprehensive list of all the things that done to this car - as well as noteable things about it:

 - Erebuni body kit
 - Turbo hood with custom venting
 - SR20DET redtop on stock boost/turbo
 - Appx. 110,000km's on engine
 - Appx. 175,000km's on car
 - Cold air intake and intercooler with custom piping
 - Turbosmart bov
 - Aftermarket gauges rpm, boost, water temp, oil
 - Stainless shift knob and fancy pedals
 - ACT STG 2 Disk Clutch
 - 3" exhaust, no cat
 - Wheels 16x7 front, 16x8 rear, on A.R.E. rims
 - Custom balanced drive shaft, engine mount and solid tranny mount
 - Canuck MS lowering springs
 - Goodrich stainless braided brake lines
 - Taylor battery box with relocation behind passenger seat
 - Custom rear tower bar
 - Engine strut bar
 - Stripped intearior from behind front seats and back

Below is a list of noteable things about the car that will need attention sooner or later:

 - Previous year's auto-x killed the shocks, they need replacing
 - The cluster swap from digital to analog isn't finished
 - The fill pipe for gas probably has a hole, filling a full tank of gas shows leaking
 - Some of the wiring is a bit sketchy and will need repair/redo
 - Driveshaft has small wobble and needs carrier bearing re-done
 - Tires are quite warn and need replacing
 - Took out door panels for replacing, was gonna do a lightwieght cover but ran outta time

Parts I have that will be going with the sale for free:

 - White Stock MKII hood
 - White hatch with perfect glass
 - Set of front and rear glass for passenger and drivers windows
 - White fender
 - Set of MKI tails lights
 - Several trim and bezel bits
 - several pop-up headlight motors
 - Marker lights
 - Front windshield wiper motor
 - Alternator
 - various belts and buckles
 - various buttons and trim pieces
 - I'm sure there is more but I would have to start opening boxes

Parts I could sell along with the car for extra added money:

 - Garrett T28 turbo
 - Driver & passenger Ractive reclinable seats with slider rails
 - 5 point harness belts for driver
 - SAFC

Enough with the blah blah. More can be answered later with questions. On with the pictars.

Since my webhosting place is having issues - I am linking to my actual kijiji (Canada's craigslist) so you can see the pictars.
http://lethbridge.kijiji.ca/c-ViewAd?AdId=373622904&Guid=136dacef-6e10-a20b-2713-ce40ffff1a4a

ARE YOU FUCKIN KIDDING ME WHY COULDN'T YOU POST THIS LIKE 2 WEEKS AGO FUUUUUUCK! I wanted to buy this car before you did but didn't have the money now it's up for sale again and i'm in same fuckling boat GODDAMNIT!

glws bro hope fully I can scrape some dough together and get it....

I always did love those wheels on that kitted car... sux you're getting out of the game but DAMN make sure whoever buys it gets on the forum here!

Props for a respectable S12'er and a great ride.

Sorry sideways_s12 - it was pretty hard to push that post button when the time came. I've been debating for the last couple months.

Thanks Arro. I might come back to an s12 one day. Had 4 of em over the last few years - so I definitely enjoy em. Community here is great too!

Yeah but what a time to get rid of this particular one :/

Is it originally an all white car? Or was is it repainted?

Ill ask my dad if he wants one :LOL: He kinda likes them, His dad had one when they came out

I hope the car will stay in the community, it's quite an unique S12!

Yes it is... Wish i could pick it up maybe he'll still have it in a few months *crosses fingers*

BUY IT!!!

I'll get back to ya sideways_s12 on the safc details and price.

Nevermind sir my girl found hers....no longer need it thanks anyway

Bump!

Did I mention that this car has the full, installed, no longer available Erebuni body kit on it??....

Dam....sorry u gotta part with it. How much for the 5point harness?

Lol alright

zastaba on 08:05:17 PM / 08-Mar-12Price edit: $4500.00 CAD.

Ugh im getting a job soon that i could buy that with 2.5 checks :(

if you can get it to me id trade you my 88 and some money for it :P other wise mine going in for an sr20 swap next week i live in Vancouver bc

*DROOLS*

Well after a lack of interest on here - it's time for me to post up my car on kijiji/craigslist.

Unless someone here wants to take it off my hands....

Or... part it out :)

Either way it's a sad outcome. It is what it is.

Im very interested but dont have the funds which means squat to you lol wish I could come into so money...

OR get the kit molded and sell that to make whatever money that you need =)

Yeah but group buys and Cs12 never work out lol everyone says they want it but never come through with the money...

you mentioned you had a white fender? is it the drivers side? where are you loated? interested in selling?

i said id buy it >.> but i wanted you to send me more pics more info and a list of what id be getting into...

was hoping for some current pictures is there rust if so were and how bad hows the compresion in the engine if i was to buy it how much work would i have to put into it to make it perfect and u say lowering spring you probably mentioned them but are the the magen full kil or just different springs? im not trying to seem like an ass its just im doing an sr20 to mine and it might be cheaper to just buy yours :P but id dont want to get screwed over lol sadly its happened a few time no offence to you at all just sayin im gonna go review page one again but pm me or feel free to post here incase people here want to know the same thing.

If you only closer :(

If I didn't have to clear it through customs, and I could afford it... Sorry dude. Good luck.

I feel you on the bozos on cl, I had a lifted, runing driving legit trail jeep, couldn't get 700 bucks for it... So many  Waited like 3 weeks then an emergency came up and I had to scrap it for 400 bucks :(
I hated junking my jeep, it wasnt pristine but I thought it deserved better than that... But I also understand family comes first.
 
Point? Its a buyers market, you'd probably be better off to hold off selling it...

But if not, this is a rare piece of history, not to mention with the ultra rare bodykit on it, please, I beg... No, I think I speak for all of cs12 when I say I beg you please, don't sell that car to some asshat teenaged drifter homo that will beat the shit out of it and junk it when he's finished...
Can you imagine some kid zip tieing that priceless kit together after he's smacked a wall?

God, it kills me I don't have the money otherwise id personally hitchhike there to make sure it didn't happen...
Someone come up with cash and save this car, id even say its a pride of the community, one of the best looking cars we have to offer...

im not trying to seem like an ass man sorry if it seemed that way im just saying yes you have a very nice car but it needs alot of work wither a lots been done to a car or not when it need that much done to it the price is a bit steep i bought my s12 for 500 spent about 500, 2600 on the sr20det out of an s14, 800 to swap it in and 1000 for exhaust and inter cool piping thats 5400 and it will be done (theres alot more getting done that i didnt list obviously but its all in the install price) so say if i got yours 4500 with everything you listed its going to be over that price and have a s13 sr20 again not trying to be a dick for me this is my own opinion its wasn't worth it but that body kit >.> oh that body kit almost does it for me lol now that i see u dropped the price i might have but JUST yesterday finished ordering my engine... enough with the blah blah tho GLWS defiantly worth 4000 if i have enough after swap and its not sold 4000 might be worth just the body kit LOL

i bought my s12 with sr20 that had gtir t28 metal headgasket full poly kit tomie cam 550 injector and apexi avc-r boost controller and a bunch of other crap for $2300

Somebody must buy this car!

thers different sr20's any sr20 that is s13 is a good swap becuase its the cheapest but the sr20 out of an s14 is worth the effort in the end it comes stock with t28 bb turbo and has vvti wich opens up alot more tuneability.

heith: sounds like you got a great deal! Good on ya!

dkdsilver: ya it would be nice to have the s14 sr20 - but what's in it is what's in it. It's still plenty fun - has good pep - and can easily be upped in power as is.

The reality is that if I can't get what I think is reasonable for the car, I'll just keep it for now. I'm not gonna give it away - nor am I gonna part it and wreck what is a great ride. I just realistically won't have to funds to work more on it for a couple years. It'll sit for a long while unless someone is gonna take it off my hands.

Again not meaning to be offencive i was just comparing really honestly i would have gave in and bought urs but i was lucky and found a really good deal on just fixing mine up i wish you the best and hope u sell it soon for urs and the cars sake.  Siriously guys some one buy it,  it is worth what he is asking.

dkdsilver on 01:48:45 PM / 22-May-12Again not meaning to be offencive i was just comparing really honestly i would have gave in and bought urs but i was lucky and found a really good deal on just fixing mine up i wish you the best and hope u sell it soon for urs and the cars sake.  Siriously guys some one buy it,  it is worth what he is asking.

dkdsilver on 01:48:45 PM / 22-May-12... Siriously guys some one buy it,  it is worth what he is asking.

If we get a new place out here with a nice garage i may be in contact. I am in Calgary once or twice a year so i should try to drop in and see it if it doesn't sell by then :).

 Dad has a house in the SW, was in McKenzie town but got a new place in New Brighton. Too bad there is no room in the garage.... 2 Modified 2003 10th anniversary cobras,  2 GSXR's (a 600 and a 750), and a truck/ John's Beamer Or i would get it :( GLWS Hope you get your asking price!

I'd almost do $4000 CAD for this. Godspeed.

what will it take to get this car into the states

what are the offsets on the wheels, r u using spacers?

cutter67 on 08:38:59 PM / 28-Aug-12what will it take to get this car into the states

pakii-afa on 10:48:42 PM / 28-Aug-12what are the offsets on the wheels, r u using spacers?

Damn and with a price drop maybe tax time it will still be around?