S14 Blacktop non vt t28 good on stock ca?

i have an 89 ca18det with a blitz chipped ecu, stock ca maf, stock 370cc injectors will a t28 from a s14 blacktop sr not blow up my engine without tuning? i was thinking running it at 14lbs on my ca. i have questions though does my turbo feed lines bolt right up to a t28, does it bolt right up to my stock manifold bottom mount, does the 3 bolt triangle flange bolt up the same to my downpipe its an isis sr one and do i need an oil restrictor. i have a redtop sr t25 on my ca now.

You should be fine. You will lag a bit more but a s14 no bb t28 is not that much bigger than a sr t25. I am running a similar setup on my daily but i have a chip from turbonoz. I am running 16 lbs and have about 260 hp. I do have a fpr, 255 pump, and front mount intercooler. Turbonoz is selling his chips on ebay now but, I bought it from him off driftworks. I thing I would do if you are going to run 14 lbs is get arp head studs i stretched my stock studs running 20lbs last year at a drift event.

I won't be running more than 14lbs if I get it. What's you fpr set at?