[socal] Need help with installing sr20 into s12.

Started by 86forever · Jan 15, 2011 · 28postsSMF 2010–26

86foreverJan 15, 2011, 1:33 am · #1

So here it is. I am finally stepping into man hood by swapping motors, from a ca20e to a sr20det. Now here the problem i dont have the single clue how to do the wired harness and what monifiction i have to do. I am not asking you to install it for me but to coach me to it, i hate doing wired harness. Anyways this what i got so far,

srd20 motor only!!!

what i need
everything trans, motor mount, intake moifold, turbo , exhaust monifold, and ext..... i need the hole shit band!!! :glare:

I need help installing this because i never had a cross over hardness work done before. i need help and some guideline to get me throw this :yes:

MaxpowJan 15, 2011, 4:13 am · #2

Damn. Go vg30. I don't know jack shit about sr's :(. We will help however we can!

86foreverJan 15, 2011, 6:54 pm · #3

lol i am thinking about it.

Colonel GustardJan 15, 2011, 10:16 pm · #4

go VG, theres an SE at the yard and we can get the crossmember off it and do work

tuhsty s-12Jan 16, 2011, 9:16 am · #5

stick with the sr20 much more room to work on engine in the bay... i just did this swap and its more or less straight forward any help needed jus holla. dont have much info on wiring as i have after market management in my car and it came with its own labled harness... but that info is easily available on this forum.

gerrybgJan 17, 2011, 8:09 am · #6

Search button is your friend wiring info is all on here

86foreverJan 17, 2011, 5:45 pm · #7

Yeah i am sticking with the sr for now

RedneckJan 17, 2011, 5:56 pm · #8

86forever on 05:45:03 PM / 17-Jan-11Yeah i am sticking with the sr for now

You literally just posted in another thread you made that your going with the vg30. You change your mind by the minute.

MaxpowJan 17, 2011, 5:58 pm · #9

lol.

86foreverJan 17, 2011, 6:24 pm · #10

Redneck on 05:56:02 PM / 17-Jan-11You literally just posted in another thread you made that your going with the vg30. You change your mind by the minute.

No! i said that i was going to get vg30et next month but i am installing my sr20 on to my s12!!!!!

EightySix200SXJan 17, 2011, 7:15 pm · #11

motor,ecu harness, bellhousing (use s12 physical trans), ignitor, maf...... i can help out

what do you have so far?

86foreverJan 17, 2011, 10:52 pm · #12

so far i have only the motor no acc... so i need very think you just said.

Wolf DilworthJan 17, 2011, 10:57 pm · #13

86forever on 10:52:16 PM / 17-Jan-11...so i need very think you just said.

OK, someone needs to slow down on the Barley-Pops when posting to the forum... :o)

86foreverJan 17, 2011, 10:59 pm · #14

Wolf Dilworth on 10:57:23 PM / 17-Jan-11OK, someone needs to slow down on the Barley-Pops when posting to the forum... :o)

huh?

Phisherman09Jan 17, 2011, 11:00 pm · #15

use ka swap wiring guide. works like a champ.

sr powa.

86foreverJan 17, 2011, 11:05 pm · #16

Phisherman09 on 11:00:49 PM / 17-Jan-11use ka swap wiring guide. works like a champ.

sr powa.

Thank you Phisherman09

Wolf DilworthJan 18, 2011, 10:52 am · #17

86forever on 10:52:16 PM / 17-Jan-11so i need very think you just said.

^^^ Could you please plot the grammar of this sentence? ^^^

86foreverJan 19, 2011, 6:54 pm · #18

Wolf Dilworth on 10:52:17 AM / 18-Jan-11^^^ Could you please plot the grammar of this sentence? ^^^

opps sorry about that lol

Wolf DilworthJan 19, 2011, 10:40 pm · #19

No big... Just pullin yer chain.

Hey, it is hump day... Yah!

86foreverJan 20, 2011, 7:58 pm · #20

question do i need the ka harness for my sr that going on to my s12?

Colonel GustardJan 20, 2011, 8:07 pm · #21

if you need a KA harness, my friend has one in his garage off of his 91 KADE. it was an auto if that matters. he also has motor mounts, alternator, intake manifold with fuel rail and shtuff. if any of this bolts on to the SR block lemme kno and ill get them for ya

86foreverJan 20, 2011, 9:13 pm · #22

Colonel Gustard on 08:07:20 PM / 20-Jan-11if you need a KA harness, my friend has one in his garage off of his 91 KADE. it was an auto if that matters. he also has motor mounts, alternator, intake manifold with fuel rail and shtuff. if any of this bolts on to the SR block lemme kno and ill get them for ya

I trying to find out about the ka harness if i do need it ill hit you up, i also herd that the motor mounts also fit on a sr. so ill find out if true not hopefully someone who know about this will read this.

Colonel GustardJan 20, 2011, 9:17 pm · #23

for sure, the stuffs just hanging out there, he was gonna put them on c-list but hes too lazy lol. i can prolly snatch it up since hes leaving to Florida for 3 years on saturday

86foreverJan 20, 2011, 9:21 pm · #24

lol

Colonel GustardJan 20, 2011, 9:23 pm · #25

ill snatch them up and stash them in my garage for ya, if they fit i can give them to you when we meet up

MaxpowJan 20, 2011, 9:32 pm · #26

Manny is moving? Sucks.

Colonel GustardJan 20, 2011, 9:34 pm · #27

yup. hes moving with his sister for 3 years. hes being a weenie. i need to get my Clarion touchscreen stereo out of his truck before he leaves

MaxpowJan 20, 2011, 10:20 pm · #28

Gay everyone leaving like a bitch.