Sep 10, 2010, 1:56 pm · #1
i wanna install a performance radiator from godspeed for a skyline in my v6 s12.the hoses match up in the same place just the whole idea or having 2 radiator caps.will that cause a problem???
Skyline Radiator.will It Work?
Sep 10, 2010, 2:40 pm · #2
go for it
you need to modify your mounts anyway...... so i think you should do it.
hey
i use a Primera/G20 Radiator and it looks like all Nissan Rads are the same size in high and width.
i even trayed a Micra one-->lol would fit too
Sep 10, 2010, 2:55 pm · #3
silvias121987i wanna install a performance radiator from godspeed for a skyline in my v6 s12.the hoses match up in the same place just the whole idea or having 2 radiator caps.will that cause a problem???
radiators made for automatic transmission cars are different from ones made for manual transmission cars. make sure the radiator has an auto. trans. fluid cooler or you'll need an external unit.
Sep 10, 2010, 5:01 pm · #4
ok guys thanks.o and im droppin the radiator in after my 5 speed swap so i dont have to deal with the sluggish auto tranny
Sep 10, 2010, 6:43 pm · #5
well there you go. problem solved.
Sep 10, 2010, 7:53 pm · #6
one thing to note, you'll probably have to permanently seal up the radiator cap on the lower of the two caps.
Sep 10, 2010, 8:06 pm · #7
check out my build thread, I did the exact same thing you're doing...
it was a godpseed rad for an rb20
Sep 15, 2010, 3:22 pm · #8
Wats the link to ur build so I can check it out?
Sep 15, 2010, 6:48 pm · #9
Xano on 07:53:48 PM / 10-Sep-10one thing to note, you'll probably have to permanently seal up the radiator cap on the lower of the two caps.
No just use a cap that has a higher pressure rating.