Illuminated Casette Deck/ Drive Cumputer/ Cubby Hole

I am Making these for 30$, custom lettering and images (two colour) are doable for the same price
i had to raise the price as they raised the price of the etching.

Boo teasers!

Im interested in seeing how it turns out.

Im also afraid it'll turn into something you see at a liquor store window too. HMMMMMMz

CLeaning this up ....

.

That's not bad looking.  I sort of dig it.  I just swapped my stock amp for a cubby hold in order to store stuff in there.  But I def. like what you did.

Off topic a little, but I have an Xplode deck also and I cannot find a plate/filler piece that covers the exposed metal bits of the sides of the deck.  I was wondering if you could take a picture of your deck and let me know what you used for that filler plate.  I made something so it works for now, but I'm not happy with it.

DraconisThat's not bad looking.  I sort of dig it.  I just swapped my stock amp for a cubby hold in order to store stuff in there.  But I def. like what you did.

Off topic a little, but I have an Xplode deck also and I cannot find a plate/filler piece that covers the exposed metal bits of the sides of the deck.  I was wondering if you could take a picture of your deck and let me know what you used for that filler plate.  I made something so it works for now, but I'm not happy with it.

SC S12Its a generic filler plate from Crutchfeild its metal with a thin vinyl layer , or i could take it and scan it in for ya.

Actually looks pretty sick.

Anyone have a link to the adapter kit thing for around the CD player? I've looked and looking but can't find anything, unless I've happened to pass over it without noticing, right now I have cardboard, haha, which is fine for while it's sitting in the garage, but looks pretty shit.

Sorry for the hijack, that looks sweet! If you were to make them and sell them I'd totally buy one!

dereklee

Sorry for the hijack, that looks sweet! If you were to make them and sell them I'd totally buy one!

SC S12Plate thingy to come tomorrow. and if i sell these it would be well... expensive like 20 buck apiece... it was 16usd to lazer etch it hour + and multiple passes at low power..

and the lighting is n****r rigged. its a bent bit of coat hanger looped around the Tape deck light socket and screwed down at the other end...

but i could make them...rotary tool paint and time... and like 1~2 dollar shipping states wise anyhow...

.

That looks sweet, I'm sure it'll look awesome at night..

And they don't make those adapters anymore?

Quick thing, I really dig that slated piece on your back window, did that come stock or was it a mod?

You have a very nice car!

derekleeThat looks sweet, I'm sure it'll look awesome at night..

And they don't make those adapters anymore?

Quick thing, I really dig that slated piece on your back window, did that come stock or was it a mod?

You have a very nice car!

It should be pretty easy to get a blanking plate for the Sony head unit Draconis.. Most car audio places should have one. I also have an Xplod head unit with Bluetooth, built-in mic and auxiliary input.

Oh yeah it should be easy to get one.  Problem is getting one that looks good.  The couple I have tried look like a$$.  Ah well, I'm getting a new unit and will try to get another plate and see if ti works better this time.

.

SC S12Again at night... looks better in person...not so good on a point and shoot with no flash

That is a f*k'n peace of art

.

SC...where the hell are you getting these things made? I want to knoowwww

i am cutting them myself and all that jazz, then i take it to an engraving shop to burn the lettering in...

i have one Filler plate here on my desk that was for someone but i haven't heard back from them ....

dude that is so dope its so 80's! damn dude me wants! where did u buy that front plate one?

Great work dude! U should produce these.

very awesome, i expected way less. the orange/black matches the cluster and buttons very well.

if that wasnt the same place for my switchboard id be wanting one too

SC You think you can cut me one for me 84 ca20e? i'll pay for shipping and everything. I have some in interior lights under the dash and under some seats and i think that'll look cool with all of the lights.

wow. im horny. i dont know why. but i just figured id let you guys know. i really wanna bite someones bean. i mean. chomp on some ass

David Bwow. im horny. i dont know why. but i just figured id let you guys know. i really wanna bite someones bean. i mean. chomp on some ass

Ill start making them Cost Should be like 25 bucks shipped
Pm me if you want them and with lettering choice ( no character limit whithen reason, fonts custom as well)

One is done for Dareklee, one custom one for VG33erGazelle

@ 86 200sx
I made that one as well, but the illumination makes it too pricey to produce in my garage

One that says Nissan Silvia rs-x

EightySix200SXOne that says Nissan Silvia rs-x

I'm stoked for mine, can't wait

VG33ERGazelle?I'm stoked for mine, can't wait  

haha no rush, like I said...the car don't even run yet, plus I think I have a way figured out how to illuminate it using the factory illumination

VG33ERGazelle?haha no rush, like I said...the car don't even run yet, plus I think I have a way figured out how to illuminate it using the factory illumination

would you consider a switch panel? where the radio goes?

it would be awesome if you could do this, i need a place to put aux switches

perhaps i could put them in the location youre using. pm me and we can figure this out.

demonic s12would you consider a switch panel? where the radio goes?

it would be awesome if you could do this, i need a place to put aux switches

perhaps i could put them in the location youre using. pm me and we can figure this out.

SC S12pm is sent

to those who wanted SILVIA R-SX
(i used the twin cam RS-X logo, it was balanced nicely lol)
they will be out to get engraved on monday

this is small so hopefully people wont try and start making these ... though i doubt they would

SC S12to those who wanted SILVIA R-SX
(i used the twin cam RS-X logo, it was balanced nicely lol)
they will be out to get engraved on monday

demonic s12do you have that in a larger size? so i could perhaps get a vinyl guy to cut some decals?

VG30 S12 (1/2, Silvia to come as soon as it gets done) and VG33Gazelle? Shipping out tuesday...

Demonic S12, Eightsix200sx, VG30 S12 yours will be out to engrave on tuesday

ill also see about decals for your two Demonic S12 & Eightsix200sx. Colours?

shweeet. I'll be sure to get in slapped in asap and take some pics.

ill take two in black, if you get the entire thing, including silvia, in fact...

demonic s12ill take two in black, if you get the entire thing, including silvia, in fact...

Bump bacause Gazeles part finnaly got done i i just got it today, will drill/countersink the holes and mail it tomorrow
has residue from the tape and stuff...

nice! looks awesome!

86 and demonic
i will be gone for the next week, so ill get yours sent out when i get back...
and i think it would total 50$ for Silvia and RS-X decals together in the same colour

Im gonna move this to product advertisement, since you've started producing them for a number of members.

one silvia decal in lightish grey
one rs-x decal in lightish grey
one rx-g decal in lightish grey

hey bro i still gotta ship you those switch covers pm me ur address again and give me a total for the above items. if i supply a font for the FISCO version s12 i need one of these as well

thanks

I can get on that shortly
But i have to redo the fonts, they were still too jagged to cut

All Decals also have to be Normal the shop wont cut reflective