GARAGE-13 Drift specialists.

Howdy,

I work for Garage-13 here in Melbourne (Victoria, Australia), and i am just here to say we have got more and more parts in stock (and available on by order), engine, suspension, rims, interior, exterior, etc etc...

Check out www.garage-13.com for all parts available, and if you have anything relating to the S12's, let me know, as i am pushing the boss to get more and more S12 parts happening.

I am incharge of all fibreglass productions (Custom Fibre Division), and we will have a full kit available for the S12's within a month, so stay tuned to the site for developments on the demo cars, one being my S12.

Hope you like, and if you have any enquire's, speak to Alex, the boss, and he should be able to help you out.

Catch.

I'm giving these guys a try...I'm getting a HKS style dump pipe for my T28BB turbo of them. I'll let everyone know how it works out.

Get some pics of the full body kit when you get it done! I am VERY interested!

Soon im getting many things off you guys.

Drift button, Steering wheels spacer, stock CA rims, magnetic sump plug, R32 Injectors, nismo rear pods, skirts, c-spanner, nismo radiator cap.

I think thats it lol ;)

Drift button?

Press it and you go sideways....haha nah its so don't have to hold your handbrake button down when using it to drift, i just hold it down myself but you can also use a 5c (or equivalent small coin) piece and some tape to hold it down to temporarily.

Press it and you go sideways....haha

maybe its my lack of sleep.... but your lame jokes make me laugh :lol:

Hehe not my fault if my jokes are teh lame, good to see someone liked em tho :D

u'd besuprised how many ppl think a drift button will make em go sideways! then we tell em its a handbrake button for drifters. and yes, neb lame joke, but i too laughed............exams are wearing me thin!

lol... That was funny.

Sheppo,
Dude if you guys aren't already doing it, you should produce some custom tie rods for the S13 coilover conversion. I'm pretty sure that's the only custom piece you need for the conversion, you guys should talk to Nebs or Salps or one of those guys to get specific measurements for the part. There'd be a fair few people interested I think
Of course if you're already done it, how much?

i have been told our tie rod ends have enuff thread to be would down to suit the S12. but i'll have an exact answer when i do the coilover swap myself.

That rocks dude ...let me know ASAP, I'm hopefully picking up my S12 turbo this weekend and it's going straight into the workshop for suspension, brakes, diff, seats and transmission (it already has a CA18DET). So yeah as soon as you can let me know I'm very interested in purchasing a set.
Thanks Shep

hey sheppo are u friends with alex? he bought some parts of me.

yeah i see alex a couple of times a week, seeing as i do the f/glassing for him.

Any word on the bodykit you guys are "Working on". I still laugh at the drift button thing.....:devil:

why do u laugh at the "drift button thing"?

Cos i'm a funny man of course :P

I just thought it was funny :)

SHEPPO?!?!?!?!?! Wots going on with this?!!?!?!?!? ME WANT TO BUYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY

I WAS LOOKING FOR STUFF ABOUT THE S12 AND CAME ACROSS THIS RPS12 WITH FULL BODY KIT!!!! I THINK IT IS AFTRMRKT CHECK.. LOOKS PRETTY COOL TO ME http://www.technoracer.com/gallery/images/s12_silvia_aero_kit_jdm.jpg

Yes its aftermarket. Made by the Eribuni company. NO, they don't make it anymore. There is ONE member here who has the full kit. We are in the process of talking to him and arranging molds to be made so we can sel it to whoever wants one. Check the "Visual Mods" section. Listed as Body kit.

The Erebuni kit is a similar mock up of the one posted above. The white car runs some japanese kit, it's actually not the Erebuni one.

Fooled me. But its damn close!!

The Erebuni kit is a similar mock up of the one posted above. The white car runs some japanese kit, it's actually not the Erebuni one.Are you sure; it looks remarkably like the Erebuni...down to the side mouldings, and rear, as well as the front turn signal cut outs...

man i wish are cars had some aftermarket support or maintained the support it had. but i like this our cars arent played out like AE86's and S13's no offense!!! cause i like em but you guys know what i mean!

well keep ya pants on ppl, we have front and rear strut braces being designed and custom made for the S12's. Also the skirts are for sale, Vertex, look dead sexy on S12!!! rear pods and fronts are in development as we speak, so expect them shortly.

Parts that will suit S12's with minor/no mods to fit include:

Fuel Pump
Catch Cans
Magnetic Sump Plugs
Shift knobs
S13 coilovers for the front
Rims
Drift buttons
S13 side skirts
S13 Caster rods
Diff centers
Bolt on & slip on spacers
Stickers :)

Thats to name a few.

Mmmmm noice one sheppy!!
Post some pics if you can of the parts fitted to an s12!

Also ill be buying some skirts very soon my son :mike:

yeah i'll get pics when i install them on my car. Neb has a catch can and radiator cap he's just installed, i am sure he can link you to the pic of them.

i have the Walbro 500HP fuel pump fitted into my S12. Only modification to make it fit was to get a longer piece of EFI hose and 3 cable ties. Also have the magnetic sump plug installed, and a stainless dump pipe (same as the HKS copies garage-13 sells) on my ca18det. The gear shift boot is going to go on the car this week.

I'll shortly have the strut bars, engine dampener and some other goodies so there will be pics.

catch yas..

Ive got an engine damper fittied to my car.

The Erebuni kit is a similar mock up of the one posted above. The white car runs some japanese kit, it's actually not the Erebuni one.
__________________
-Jason Arro

Just wondering if you can define moc up? Im pretty sure this is a original Erebuni kit. How would one know if a kit is original or moced up?

hey sheppo,

I know your the carbon fiber man.. but ive been looking every where for Nardi Steering Wheels.. do you have a lot in stock.. and what condition are the 2nd hand ones?
They are the ultimate driving wheel

Sheppo, did I hear you write that the Side Skirts are for sale?! HOW MUCH!

turbo steve, you can get new Nardi wheels from HJC in penrith, syd, aus.

turbo steve, you can get new Nardi wheels from HJC in penrith, syd, aus.

cool thats even closer to me, thanks

How about these?
http://www.garage-13.com/controlarms1a.jpg
SHEPPO3930, When are these available? :)
I would love to get these.
Can my shop get wholesale prices? Do we have to buy in?
thanks

^^^^^^^ got no idea, email the boss (alex), he'll tell u. i am on holidays atm, nothing moves fast when i am on holidays, so if you want fast answers, speak to him.

they look like the S13 control arms for the front, i am sure he can get em in from japan. in regards to ya shop getting trade prices, i aint too sure.

at the end of January i wont be doing the production fibreglassing for g-13 anymore, as i go back to uni and will have no spare time for it. i will however be developing a kit for the S12 in my back yard very slowely (wheneva i have time), i will be developing chassis braces with another S12 driver/custom fabricator, and i'll make sure i let you's know about new parts when they arrive, that will fit the S12's.

i will still be active with g-13, just not doing fibreglassing produciton. just research and development for things like front end body conversions, S12 body kit development, S12 chassis development, etc etc.

catch yas.

i am no longer associated with garage-13, so please dont ask me questions about parts, body kits, etc.

i have finished up with them as uni is about to start, and i have no spare time.

thanks for your interests, and i will still muck around with body additions for the S12's, just at a slower pace in my shed :)

cheers