Bro's, I Need a Couple parts

Started by Jeremy A · Mar 27, 2013 · 11postsSMF 2010–26

Jeremy AMar 27, 2013, 5:27 pm · #1

Hey guys, I'm located in Las Vegas, 89118, an I'm looking for a couple of parts to get my brothers KA swap complete.

Firstly, I'm looking for a banjo bolt and two crush washers that fit onto an S12 power steering pump, it goes right here,

posted image

Secondly, I'm looking for a speedometer gear plug that comes out of a MANUAL trans S12. It plugs/unplugs right into the trans like this,

I really need this stuff, and may update with other random tidbits that come up that I need. I've got cash in hand for em.

Lemme know!

sideways_s12Mar 27, 2013, 7:23 pm · #2

you should of asked me while you were here last night I'm sure I have the p/s piece...

IggyEGuanaMar 28, 2013, 12:02 am · #3

the S12s speedo gear goes into the KA trans. pretty sure thats what everyone else with a KA swap has done. it worked on my ca18det trans. junkyard will have it if nobody else local does. one from a z31 might work as well. same trans and its cable driven speedo

WonderingravenMar 28, 2013, 12:32 am · #4

There is a few z31's in the lamb yard, and 1 85 I think automatic in the henderson yard, the manual version is also at the henderson yard with the head still in the seat.

I really need to get out there this weekend if time permits it and jack the whole front clip.

Jeremy AMar 28, 2013, 2:29 am · #5

sideways_s12 on 07:23:45 PM / 27-Mar-13you should of asked me while you were here last night I'm sure I have the p/s piece...

Dope, I'll throw you a text man.

IggyEGuana on 12:02:23 AM / 28-Mar-13the S12s speedo gear goes into the KA trans. pretty sure thats what everyone else with a KA swap has done.

Exactly, I just don't have one cause the car was just the shell only. And the one from my slushbox that I swapped out doesn't fit into the KA trans, different size. Good thinking about the z31 similarity, just might have to try.

Wonderingraven on 12:32:44 AM / 28-Mar-13There is a few z31's in the lamb yard, and 1 85 I think automatic in the henderson yard, the manual version is also at the henderson yard with the head still in the seat.

So a few z31's at the Lamb yard and there's a manual S12 at the Henderson yard?

WonderingravenMar 28, 2013, 9:47 am · #6

I believe so I remember seeing the shifter, that was a manual s12 even though it's a ca20.

sideways_s12Mar 28, 2013, 1:01 pm · #7

Yeah the Trans is in the trunk i don't remember seeing the cable tho...but then again i want looking for it...

ArroMar 28, 2013, 3:17 pm · #8

IggyEGuana on 12:02:23 AM / 28-Mar-13the S12s speedo gear goes into the KA trans. pretty sure thats what everyone else with a KA swap has done. it worked on my ca18det trans. junkyard will have it if nobody else local does. one from a z31 might work as well. same trans and its cable driven speedo

From what Sterling and I could tell, the Mark I speedo gear is smaller for the B trans, and won't work with the S13/S14 trans. A Mark II should be fine, but he has a Mark I.

This is at least the case with my car. I need to get a Mark II speedo setup. I have no speedo readout for the time being.

Jeremy AApr 14, 2013, 11:19 pm · #9

Sweet, so I've got these parts taken care of, thanks to this fantastic Las Vegas S12 community. Thanks homies!

Arro on 03:17:25 PM / 28-Mar-13From what Sterling and I could tell, the Mark I speedo gear is smaller for the B trans, and won't work with the S13/S14 trans. A Mark II should be fine, but he has a Mark I.

Interestingly, in my case, the speedo plug from a S12 B trans plugged right into the KA C trans, rad!

turbo-s12Apr 14, 2013, 11:24 pm · #10

^ ya same here b trans worked fine in mine

sideways_s12Apr 15, 2013, 2:11 am · #11

Jeremy A on 11:19:13 PM / 14-Apr-13Sweet, so I've got these parts taken care of, thanks to this fantastic Las Vegas S12 community. Thanks homies!

No problem!